£0.10Per Entry
DeWalt XR 18V 8 Piece Cordless Kit with 3x 5ah Batteries
The DeWalt XR 18V 8 Piece Kit with 3x 5ah Batteries is one of our most desirable cordless kits, consisting of DCF887 Impact Driver, DCD796 Combi Drill, DCP580 Planer, DCG412N Angle Grinder, DCS355 Multitool Cutter, DCS391 Circular Saw, DCS331N Jigsaw and DCL040 Torch all complete with charger, 3 x 5amp batteries, beautifully packed in 2 x DWST1-70322 Toughsystem Tool boxes for ease of transportation.
Features & Benefits:
DCF887 Impact Driver
- Latest generation 18V XR Li-Ion Brushless Impact Driver.
- 3 Mode Impact selector improves user control.
- Improved Brushless motor provides 28% increased torque.
- 135mm Overall length.
- 3 LED ‘Halo‘ ring provides maximum illumination of work piece
- 6.35mm ‘drop and load‘ hex bit holder allows for quick, one handed fitment
- Aluminium front housing provides greater heat dispersion increasing motor life
- Ergonomic handle and rubber overmold reduces vibration and user fatigue
- Voltage – 18 V
- Max Torque – 205Nm
- Power Output – 280 Watt
- No Load Speed – 0 – 3250 rpm
- Max. Bolt Diameter – M12
- Bit Holder – 1/4″ (6.35mm)
- Length – 135 mm
- Height – 196 mm
DCD796 Combi Drill
- Brushless Motor
- Ultra compact, lightweight design
- Two speed all metal transmission
- Drill Driver and Hammer Feature
- 15 position adjustable torque control
- Intelligent trigger design a
- Improved ergonomic design with rubber grip over mould
- Improved air flow to the motor for cooler electronics and increased power
- 3 position super bright LED light
- Max Torque (Hard): 70 Nm
- Max Torque (Soft): 27 Nm
- Power Output: 460 Watt
- No Load Speed: 0-550/2000 rpm
- Beats per Minute: 0-9350/34000 bpm
- Chuck Capacity: 1.5-13 mm
- Max. Drilling Capacity [Wood]: 40 mm
- Max. Drilling Capacity [Metal]: 13 mm
- Max. Drilling Capacity [Masonry]: 13 mm
- Length: 174 mm
- Height: 203 mm
- Width: 67 mm
- Weight: 1.8 kg
DCP580 Planer
- Brushless Motor –
- Lightweight – only 3.1 Kg with battery
- Soft grip handle o
- On board blade storage and torx key – for quick and easy blade changes
- 2.0mm Depth of Cut – For large material removal
- Fine indexed, accurate depth adjustment knob allows for maximum precision with 0.1mm increments
- Front and rear shoe milled in situ – For increased accuracy
- Part of the intelligent XR Lithium-Ion Series designed for efficiency and making applications faster
- Air lock port – compatible with DeWalt Airlock dust extraction system or DWV9390-XJ Dust Bag
- Foot lock off – stands the tool above the work surface
- Market leading 9.00mm rebate capacity making it ideal for minor on-site alterations and fixes
- No Load Speed: 15,000 rpm
- Maximum Depth of Cut: 2.0 mm
- Rebating Depth: 9.0 mm
- Planer Width: 82 mm
- Shoe Length: 295 mm
- Drum Diameter: 48 mm
- Weight: 2.5 kg
- Length: 370 mm
DWV9390 Dust Bag for DCP580 Planer
- Simply locks on to the airlock port of the planer for instant dust collection.
- Large capacity dust collection bag
- Spring loaded for easy emptying
- Left or right mounting
- Compatible with: DCP580
DCG412N Angle Grinder
- Powerful and Highly Efficient PM58 DeWalt fan cooled motor with replaceable brushes.
- Steel cut spiral bevel gears provide highest level of durability and low vibration, increasing user productivity
- Low profile jam pot gear case improves gear durability and ergonomics
- Intelligent trigger & lock-off switch for enhanced work safety and control
- Battery Chemistry: XR Li-Ion
- No Load Speed: 7000 rpm
- Max. Disc Diameter: 125 mm
- Spindle Thread: M14 (22 mm)
- Weight: 2.2 kg
- Length: 400 mm
DCS355 Multitool Cutter
- DeWalt® brushless motor delivers up to 57% more run time over brushed
- Quick-Change™ accessory system allows blades and attachments to be changed quickly without wrenches
- Dual-Grip™ variable speed trigger gives users ultimate speed and application control
- Bright LED light illuminates dark work surfaces for accurate cutting
- DeWalt Oscillating Tool Guide System allows users to set the depth or height for accurate repeatability
- Input Power: 300 Watt
- No Load Speed: 0-20,000/min Length: 310mm
- Product Dimensions: 8.2 x 15.6 x 31.2 cm
- Item Weight: 1.5kg
DCS391 Circular Saw
- Powerful & Highly Efficient PM58 DEWALT fan cooled motor with replaceable brushes
- Ergonomic handle set with rubber overmold to optimise end user comfort
- Extremely durable tool design, including a cast magnesium base for repetitive, accurate cuts
- Intelligent trigger allowing total control over all applications
- Keyless bevel angle and depth of cut adjustment with easy to read scale for maximum cordless versatility
- Spindle lock for quick and easy blade change
- Lock off switch and electronic motor brake for additional control and work safety
- Ultra thin kerf 165 mm, 24 tooth carbide-tipped blade allows for efficient run time and fast, smooth cut finish at maximum 55 mm depth of cut
- Improved ergonomic design and rubber grip increase comfort
- Voltage: 18v
- Blade Diameter: 165mm
- Bore Diameter: 20mm
- Power Output: 460 Watts
- No Load Speed: 3,700/min
- Bevel Capacity: 50°
- at 90º: 55mm
- at 45º: 42.1mm
- Weight: 3.8 kg
- Length: 360mm
- Height: 240mm
DCS331N Jigsaw
- Part of the intelligent XR Lithium Ion Series designed for efficiency and making applications faster
- Powerful & Highly efficient DeWalt PM47 fan-cooled motor with replaceable brushes. delivers fast cutting action up to 3000 strokes per minute maximising user productivity
- Intelligent variable speed trigger & lock-off switch for quick controlled cuts and enhanced work safety
- Tool-free adjustable shoe with anti-scratch cover bevels 45° in both directions
- Quick and easy patented keyless blade change system, accepts T-shank blades
DCL040 Led Torch
- Compact, lightweight design with impact resistant housing
- Improved ergonomic design and rubber grip increase comfort
- The LED Bulb produces 110 Lumens output (10,000Hr Life) with a 2 Zone light pattern
- Flashlight head pivots more than 90 degrees vertically with ratchet lock
- Integrated hook for hanging however it can be used free standing
- Bulb Type: LED
- Light Output: 110Lm
- Height: 240 mm
- Length: 115 mm
- Weight: 260g
What is included:
- 1 x DeWalt DCF887N 18v XR Brushless 3 Speed Impact Driver
- 1 x DeWalt DCG412N XR 5″ Angle Grinder 18V (Body Only)
- 1x DCD796 XR Brushless Hammer Drill Driver
- 1x DCP580 XR Brushless Planer
- 1x DWV9390 Dust Bag for DCP580
- 1x DCS355 XR Cordless Oscillating Multi-Tool
- 1x DCS391 165mm Premium Circular Saw
- 1x DCS331 XR Premium Jigsaw
- 1x DCL040 LED Work Light
- 1x DCB1104-GB 4A 12V/18V Multi-Volt Powerstack Battery Charger 240V
- 3x DCB184 5.0Ah Li-Ion Slide Pack Batteries
- 2x DWST1-71195SP Toughsystem Tool Boxes
This competition is open to UK residents aged 18 or over. You may enter this competition up to 2500 times.
You will be randomly allocated ticket number(s) when ordering and will receive an email confirmation. The total amount of tickets for this competition is (75000). If all tickets do not sell out, the draw will happen on May 12, 2025 regardless.
You must answer the competition question correctly to be entered into the live draw. Incorrect entries will not be notified or entered into the live draw nor will they have any instant win prizes if the answer is answered incorrectly
You may enter the competition online, or for free by post by sending your entry to RY’s Competitions on a postcard. You must have an account on RY’s Competitions for your entry to be processed.
All details on your entry MUST correspond to the details on your account to receive the order confirmation and ticket number.
Postal entries received without a registered account cannot be processed. The live draw will take place on RY’s Competitions Facebook page using Google’s random number generator to select the winning ticket number from all Entrants.
This competition is in no way sponsored, endorsed, administered by or associated with Facebook, Apple or Google. By entering the competitions, Entrants agree that neither Facebook, Apple nor Google have any liability and are not responsible for the administration or promotion of this competition.
How many times can I enter this competition?
You can enter this competition up to 2500 times.
How do I get my number?
Once your order has been placed your ticket number(s) will be randomly allocated and will show on your order confirmation. They will also be emailed to you, and will be available in the my account area.
How is the winner chosen?
The draw is done live on Facebook using a random number generator to determine the winning ticket number. You’ll be contacted directly if you have won.
Can the draw date change?
If all the entries are sold sooner the draw will be brought forward. Keep updated on the confirmed draw date via our Facebook page and website.
